Air Conditioning Installation in Melbourne by Licensed Local Team
Celik Group Air Conditioning fits split, multi-split, ducted and light commercial systems for air conditioning in Melbourne houses, apartments and business premises. Our licensed team has done this work since 2004, sizing each system to the property, putting the price in writing and testing everything before handover.
Fully Licensed Air Conditioning Installers
Hitachi and Every Major Brand Installed
Residential and Commercial Installations

Get a fast quote
From new systems to replacing old units, our team handles it all.
20+ Years Experience
Full Licensed & Insured
1,000+ AC Installations
Interest Free Payment Options
ARCtick Licensed
Cm3 Accredited
Air Conditioning Installation in Melbourne for Homes and Businesses
Every Melbourne air conditioning installation we complete starts with the property, not a product. A property suitability assessment checks roof cavity access for a ducted option, the best spot for the outdoor unit and how many kilowatts each room needs. If the technology choice feels uncertain, a technology pathway comparison then lays out whether split systems, a multi-split, ducted systems or a light commercial setup suits your space and budget.
Our air conditioning installation service in Melbourne covers new-build installation, replacement of ageing units and renovation installation, such as a renovated extension needing new coverage. Each quote is written and itemised, and every new system meets Minimum Energy Performance Standards, which makes weighing up installers far easier than comparing price alone.

don’t take our word
See What Customers Talk About US
Homeowners and business owners rate our installs five stars on Google, pointing to honest system advice, tidy pipework and controls that were explained before the technician left.
Your Local Air Conditioning Installer in Melbourne
Melbourne properties need different solutions. Post-war brick veneer homes and weatherboard cottages in established suburbs often come down to a split versus ducted decision, while inner-suburb and middle-ring period homes need discreet outdoor unit placement under a heritage overlay. High-density apartments and townhouses have limited outdoor unit space, and housing estates going up in Melbourne’s growth corridors can take a full system before move-in. Celik Group Air Conditioning also fits out small offices and retail premises.
As an aircon installer in Melbourne, we work on brick veneer homes in Bundoora, Blackburn and Burwood, period homes in Canterbury and Brighton, apartments in Camberwell and Box Hill, renovated and extended homes in Bulleen and Balwyn, new estates in Wollert, Epping and Craigieburn, and homes and small businesses in Broadmeadows and Campbellfield.
Air Conditioning Installation Offers in Melbourne
- No-cost home or office assessment with room-by-room sizing and an itemised written quote
- Swapping gas heating for reverse cycle? We manage VEU rebate eligibility and paperwork
- Spread the cost of split, ducted and multi-split packages with Zip or HummLoan
- Signed certificate of compliance from our licensed refrigeration mechanics on each installation
- Seasonal maintenance contracts that keep new systems running at full capacity
- Lower per-unit pricing when several split systems are installed in one visit
Pick the Right System Type
One Room – A split system air conditioner pairs an indoor wall-mounted unit with an outdoor condenser for a bedroom or lounge.
A Few Rooms – A multi-split air conditioner handles a few rooms off a shared outdoor unit.
Whole Home – A ducted air conditioner sits in the roof, with ductwork feeding a vent in each room.
Office or Shop – A light commercial system is sized to the tenancy and its opening hours.
VEU Rebate Deals





We also offer AirTouch Controllers
AirTouch 2 adds a wall-mounted touchscreen and free mobile app to your ducted system, so every zone gets its own airflow control. Browse our installed pricing from Daikin, Mitsubishi Electric, Panasonic and Rinnai.


12.5kw to 20kw
from $10,250
Includes the VEU rebate, GST and the replacement of the old ducts and grills.

12.5kw to 20kw
from $10,250
Includes the VEU rebate, GST and the replacement of the old ducts and grills.

12.5kw to 18kw
from $11,350
Includes the VEU rebate, GST and the replacement of the old ducts and grills.

13.0kw to 18kw
from $9,750
Includes the VEU rebate, GST and the replacement of the old ducts and grills.
The listed prices are subject to a site visit. If there are any variations or adjustments we will quote this accordingly.
Other Heating & Air Conditioning Services in Melbourne

Reverse Cycle

Split Systems

Ducted Heating

Evaporative Cooling

Air Conditioning Service & Repairs

Heating
Book Your AC Installation in Melbourne Before Summer
New systems are booked well ahead of the first heatwave, so lock in your site visit early and have the installation scheduled at a time that suits you.
Air Conditioning Services in Melbourne From One Licensed Team
Air conditioning services in Melbourne have been our core work since 2004, and Celik Group Air Conditioning keeps supply, installation, commissioning and maintenance with the same licensed technicians. Refrigerant is handled by ARCtick-licensed staff. AS/NZS 3000 wiring rules govern the electrical side, and each job closes with a signed compliance certificate and the manufacturer warranty lodged in your name.
The team also installs bulkhead air conditioning, reverse cycle air conditioning and evaporative cooling, sets up zone management systems run from AirTouch 5 controllers, and fits ducted heating and other heating upgrades. After installation, our repair service looks after Daikin air conditioning, split systems, ducted heating, evaporative cooling, Mitsubishi air conditioning and reverse cycle air conditioning.

Sized to Your Property
A heat load calculation is worked out room by room, allowing for floor area, ceiling height, insulation, open-plan living area heat load and north-facing room heat gain, so capacity is right and the unit avoids short-cycling.
Multi-Brand Choice
As an aircon installer in Melbourne working with Samsung, Hitachi, Actron Air, Panasonic, Daikin, LG, Fujitsu General and Mitsubishi Electric, we recommend on merit, not on what is in stock.
Homes and New Builds
Ducted, multi-split and split systems go into established homes, renovations, display homes and volume-builder estates.
Commercial Sites
Light commercial systems for factories, offices, schools, facilities and nursing homes, sized to the building and its hours of use.
The Air Conditioning Installer in Melbourne With No Subcontractors
Celik Group Air Conditioning keeps every installation in-house, from the first site visit to handover. The crew secures the indoor unit on its mounting bracket, runs insulated pipe lagging over the refrigerant line set, installs the condensate drain line, and completes the electrical connection, fitting an electrical isolator switch alongside a dedicated circuit breaker, before commissioning the system through every mode. Your handover pack holds the warranty registration, a post-installation commissioning report and the compliance certificate.






HVAC Installation Service in Melbourne for Offices, Schools and Facilities
Light commercial clients use the HVAC installation service in Melbourne we run for nursing homes, schools, facilities, factories and offices, as well as multi-residential buildings. A small office or retail tenancy needing air conditioning usually suits a packaged or multi-split system, while larger buildings may need a VRV/VRF commercial system, where VRV systems run many zones from one commercial VRV/VRF outdoor unit.
Commercial jobs are quoted in writing, scheduled around trading hours and handed over with a commissioning report and warranty registration. Owners corporation approval and any council planning permit are sorted where applicable, and the same team stays on for maintenance, so the building has one provider.

AC Installation in Melbourne Backed by Real Credentials
Daikin authorised installer status, VEU provider registration, ARCtick licensing and CM3 accreditation all sit with Celik Group Air Conditioning, which never uses subcontractors.
Itemised Written Quotes
Equipment, labour and commissioning are priced line by line, so comparing installers is simple and the price does not move once you accept.
One Team From Start to Finish
The technicians who assess your property are the same people who install and commission the system.
Energy-Efficient Selections
Inverter models are matched to the heat load, keeping running costs down without oversizing the system.
Genuine Hitachi Equipment
A Hitachi air conditioning installation in Melbourne uses genuine Hitachi units, sized to the brand’s guidelines and registered for manufacturer warranty at handover.
Controls Ready on Day One
A Wi-Fi control module, wired wall controller or remote is set up before we leave, so scheduling works from the first day.
Care After Installation
Our air conditioning installation service in Melbourne continues after handover, with the first annual service and ongoing maintenance booked with the same team.
Hitachi Air Conditioning Installation in Melbourne and Every Major Brand
Some buyers arrive with a brand already in mind. If you want Hitachi, a Hitachi air conditioning installation in Melbourne follows the manufacturer’s installation guidelines using genuine equipment, and we confirm which split, multi-split or ducted models suit your rooms. Brand selection stays just as open for Mitsubishi Electric, LG, Actron Air, Fujitsu General, Samsung, Panasonic and Daikin.
Because we install across brands, the comparison is objective. Capacity, energy rating, running cost and warranty terms are lined up side by side, so your air conditioning installation in Melbourne is chosen on merit rather than a single-brand pitch.

Frequently Asked Questions
How do I choose an air conditioning installer in Melbourne?
Start by asking for proof of an ARCtick refrigerant handling licence, then request a written, itemised quote, because inconsistent quotes make fair comparisons hard. Confirm that warranty registration, a compliance certificate and a commissioning report are included, and weigh licensing and warranty terms alongside price.
What does an air conditioning installation service in Melbourne include?
An air conditioning installation in Melbourne begins at your property with sizing and a system recommendation, then a written quote. Installation day sees the crew fit the indoor unit and outdoor condenser unit, connect the refrigerant line, run power through an isolation switch, commission the system and register the warranty.
Should I choose a split, multi-split or ducted system?
Air conditioning in Melbourne homes usually comes down to how many rooms you want covered. A split suits one room, a multi-split covers a handful from one outdoor unit, and ducted gives whole-home coverage with only vents on show. Two-storey home zoning considerations are covered at the site visit.
How long does AC installation in Melbourne take?
Half a day to a full day covers most single split systems. Multi-split and ducted jobs run one to two days plus commissioning, and commercial projects are scheduled around trading hours.
Can you install in apartments, townhouses and heritage homes?
Yes. Apartments and townhouses often need owners corporation approval and have little room for an outdoor unit, so placement is checked first. Heritage overlay homes may need the unit kept out of street view, and we confirm whether a planning permit applies before quoting.
Is a Melbourne air conditioning installation covered by warranty?
Yes. Only genuine manufacturer equipment is fitted, the manufacturer warranty is registered at handover, with the work certified for compliance.
Do you provide HVAC installation service in Melbourne for commercial buildings?
Yes. We install light commercial systems for offices, factories, nursing homes, facilities, schools and retail tenancies, sized to the building’s floor plate and hours of use.
What air conditioning services in Melbourne do you offer besides installation?
The team also handles scheduled maintenance, servicing, repairs on all major brands, zoning upgrades and smart controller upgrades, so one provider looks after the system for its whole life.
Can I get a rebate on new air conditioning in Melbourne?
Swapping gas heating for an eligible reverse cycle system can attract support through the Victorian Energy Upgrades program. We check eligibility when we quote and lodge the paperwork for you.
Do you work as an aircon installer in Melbourne for landlords and builders?
Yes. Landlords book us for compliant installations before a new tenancy, and builders use us for new-build homes that have no existing system, from display homes to volume-builder projects.
Areas we serve
Serving Melbourne & Surrounding Areas
Brighton
Hampton
Broadmeadows
Hawthorn
Camberwell
Balwyn
Bundoora
Box Hill
Blackburn
Burwood
Mont Albert
Surrey Hills
Wollert
Fitzroy
Richmond
Epping
St Kilda
Prahran
Canterbury
Mt Waverley
Kensington
Parkville
Brunswick
Princes Hill
Flemington
Ascot Vale
Moonee Ponds
Ivanhoe
Heidelberg
Campbellfield
Bulleen
Templestowe
Craigieburn




