AirTouch 5 Installation in Melbourne for Smarter Zone Control
Celik Group Air Conditioning fits the AirTouch 5 smart controller to new and existing ducted systems, giving every zone its own temperature, schedule and app control. Our technicians have worked on ducted zone management systems since 2004, and each controller is fully set up and tested before we leave your home.
Licensed and Insured
Authorised AirTouch Installer
Free Quote

Get a fast quote
From new systems to replacing old units, our team handles it all.
20+ Years Experience
Full Licensed & Insured
1,000+ AC Installations
Interest-Free Payment Options
ARCtick Licensed
Cm3 Accredited
What an AirTouch 5 Upgrade Does for Your Ducted System
The AirTouch 5 swaps a basic wall thermostat for a touchscreen and app that manage up to 16 zones, turning a single-zone setup into a zoned HVAC system with independent room control and full whole-home coverage. Intelligent Temperature Sensors read the real temperature in each zone, so motorised zone dampers open and close to match your setting instead of relying on one central thermostat. Geofencing, energy insights and Google Home or Amazon Alexa voice control come built in.
Your existing ducted heater or air conditioner is retained during the retrofit. Where zone dampers are already fitted, an Air Touch controller installation in Melbourne leaves the unit, return air ducting and supply air ducting untouched, while the technician fits the brand-specific gateway module, wires the zone controller panel, places each sensor and completes the app configuration. AirTouch 5 suits compatible Daikin, Mitsubishi Electric, Fujitsu, Panasonic, Samsung and LG ducted systems, and it can also go in as part of a new reverse cycle air conditioning project.

don’t take our word
See What Customers Talk About US
Homeowners give Celik Group Air Conditioning five-star feedback for AirTouch 5 work, praising tidy wiring, zones that were named and tested, and an app walkthrough before the technician packed up.
VEU Rebate Deals





We also offer AirTouch Controllers
AirTouch 2 adds a wall-mounted touchscreen and free mobile app to your ducted system, so every zone gets its own airflow control. Browse our installed pricing from Daikin, Mitsubishi Electric, Panasonic and Rinnai.


12.5kw to 20kw
from $10,250
Includes the VEU rebate, GST and the replacement of the old ducts and grills.

12.5kw to 20kw
from $10,250
Includes the VEU rebate, GST and the replacement of the old ducts and grills.

12.5kw to 18kw
from $11,350
Includes the VEU rebate, GST and the replacement of the old ducts and grills.

13.0kw to 18kw
from $9,750
Includes the VEU rebate, GST and the replacement of the old ducts and grills.
The listed prices are subject to a site visit. If there are any variations or adjustments we will quote this accordingly.
Heating & Air Conditioning Services in Melbourne

Reverse Cycle

Split Systems

Ducted Heating

Evaporative Cooling

Air Conditioning Service & Repairs

Heating
Get in Touch
Book a free consultation with Celik Group Air Conditioning and get a written quote for AirTouch 5 installation in Melbourne, including a compatibility check on your current ducted unit.
Why Homeowners Trust Us With Their Zoning Upgrade
Celik Group Air Conditioning checks compatibility before any AirTouch controller installation in Melbourne, so installation day brings no surprises. Our licensed technicians run a duct layout assessment, confirm how many zones the existing ducting can support and match the controller to your Daikin, Mitsubishi Electric, Braemar, Brivis or Actron Air system. Zone wiring is checked for electrical safety compliance against AS/NZS 3000 wiring rules, meeting the licensed technician requirement for electrical work. A bypass damper is assessed for pressure relief, every zone passes an airflow balance test, and the paperwork includes a compliance certificate for the electrical work plus a post-installation commissioning report.






Melbourne’s Air Touch Installation Specialists Since 2004
Most of our AirTouch jobs are zoning retrofits on older single-zone systems in well-established weatherboard and brick veneer areas such as Balwyn, Box Hill and Blackburn, and period homes retrofitting zoning into original ducting in Camberwell and Canterbury. Growth-corridor homes in Craigieburn, Wollert and Epping often arrive with a standard zoning package from a volume builder or display home; two-storey homes in Melbourne’s established suburbs such as Bundoora, Bulleen and Burwood need zone separation by floor; and homes in Brighton, Broadmeadows and Campbellfield that have been renovated and extended usually need a new zone added.
Celik Group Air Conditioning is ARCtick licensed, VBA registered and fully insured. Beyond AirTouch, our air conditioning work includes split systems, VRV systems, evaporative cooling and bulkhead air conditioning, plus heating and ducted heating. Our repair service looks after ducted heating, Mitsubishi air conditioning, split systems, reverse cycle air conditioning, evaporative cooling and Daikin air conditioning.

Frequently Asked Questions
What does AirTouch 5 installation in Melbourne involve?
A duct layout assessment confirms retrofit feasibility and the right zone count first, including roof cavity access for retrofitting zone dampers. The technician then installs the controller, gateway module and zone sensors, fits a damper on each supply air duct branch where needed, and runs a commissioning test to balance airflow in every zone. You also get an app walkthrough and warranty registration.
Can AirTouch 5 be added to my existing ducted system?
Usually, yes. An AirTouch installation in Melbourne can retrofit zoning to an existing ducted heater or reverse cycle unit without replacing it, provided the unit’s control interface is compatible. Established homes with ceiling ducting suited to a zoning retrofit are the easiest. We check against manufacturer zoning compatibility guidelines, explain any warranty implications of the retrofit, and confirm owners corporation approval where applicable for apartments.
How many zones does my home need?
A simple two-zone configuration, with a living zone and a sleeping zone, suits many homes. A multi-zone configuration makes sense for a bedroom wing as a separate zone, a home office needing independent control, or north-facing rooms grouped into their own zone. We recommend a zone count based on how you actually use the house, not the maximum the controller allows.
How is an Air Touch controller installation in Melbourne different from a basic wired controller?
A wired digital controller only adjusts zones from the wall. AirTouch 5 adds app-based control, geofencing, scheduling and voice control, and an individual zone temperature sensor acts as an individual room sensor, giving more accurate readings than one central thermostat. Manual zone dampers cost the least but have to be adjusted by hand.
Will zoning lower my running costs?
Yes. Occupancy-based control stops unused rooms being conditioned all day, and it also fixes the uneven temperature you get when one thermostat runs rooms spread across the whole house. The energy savings from zoning, and the zoned efficiency you gain, depend on your system, insulation and how many zones stay closed.
How does AirTouch compare with iZone or Advantage Air?
All three are established smart zoning systems for ducted heating and cooling. Every AirTouch installation in Melbourne we quote starts by looking at your ducted unit brand, zone count and budget, then recommending the controller that fits, whether that is AirTouch 5 or another compatible option.
How long does an AirTouch installation in Melbourne take?
A straight controller swap on an already zoned system usually takes a few hours. A full zoning upgrade with new electronic zone dampers, damper actuators, a bypass damper and a zone wiring loom takes longer, as does a renovation where a renovated extension needs a new zone. The time is set out in your quote, and new-build homes specified with zoning from the outset can include a project home zoning package.
Do you fix unreliable zone wiring from older retrofits?
Yes. Faulty zone wiring from an ageing or poorly done retrofit is replaced, each damper motor and actuator is tested, and the central control board or controller is upgraded where needed so every zone responds correctly.
Areas we serve
Serving Melbourne & Surrounding Areas
Brighton
Hampton
Broadmeadows
Hawthorn
Camberwell
Balwyn
Bundoora
Box Hill
Blackburn
Burwood
Mont Albert
Surrey Hills
Wollert
Fitzroy
Richmond
Epping
St Kilda
Prahran
Canterbury
Mt Waverley
Kensington
Parkville
Brunswick
Princes Hill
Flemington
Ascot Vale
Moonee Ponds
Ivanhoe
Heidelberg
Campbellfield
Bulleen
Templestowe
Craigieburn




