Split System Repair in Melbourne — Get a Free Quote
Celik Group Air Conditioning takes care of split system repair for wall-mounted split system air conditioner units that cool and heat bedrooms, living rooms, rental properties and small shopfronts in Melbourne. Our licensed technicians carry genuine parts for Fujitsu General, Daikin, Samsung, Mitsubishi Electric, LG, Panasonic and Actron Air units, and you get an upfront quote before any work begins.
ARCtick Licensed Technicians
Daikin, Mitsubishi Electric, Fujitsu and More
Upfront Quote Before Work Starts
Get a fast quote
From new systems to replacing old units, our team handles it all.
20+ Years Experience
Full Licensed & Insured
1,000+ AC Installations
Interest Free Payment Options
ARCtick Licensed
Cm3 Accredited
Split System Faults We Fix, From Warm Air to Water on the Wall
Split system repair in Melbourne is led by the symptom, because each one points to a different part. A unit blowing warm air instead of cool usually has a refrigerant leak, so the technician runs a gas pressure test and finds the leak before they top up any refrigerant gas, since a refrigerant top-up without fixing the leak only brings the fault back. When the outdoor unit won’t start, Celik Group Air Conditioning looks at the isolation switch, compressor and outdoor fan motor, and a unit that trips the circuit breaker gets an electrical fault diagnosis on its dedicated circuit.
Celik Group Air Conditioning offers the same repair service for ducted heating systems, reverse cycle air conditioning units and rooftop evaporative cooling, and handles brand-specific faults for Daikin air conditioning plus Mitsubishi air conditioning. When a unit is past saving, we fit new split systems or another type of air conditioning that suits the room better.
don’t take our word
See What People Talk About Us
Celik Group Air Conditioning earns 5-star reviews from split system owners and landlords in Melbourne because the fault is found on the first visit, the price is agreed before work starts, and the unit runs in both modes before anyone leaves.
Split Systems Keep Melbourne Bedrooms, Rentals and Shopfronts Comfortable
Split systems are the most common air conditioning setup in Melbourne, fitted room by room in established homes, apartments, rental and investment properties and small commercial strip shopfronts. Around three in ten Greater Melbourne households rent their home, according to the 2021 Census, and plenty of those rentals still run an original, unreplaced unit. Victoria’s rental minimum standards, in force since 29 March 2021, require a fixed heater in good working order in the main living area, and a reverse cycle split system is often the appliance meeting that rule. Celik Group Air Conditioning is a split system repair service in Melbourne that helps landlords with rental and investment properties across their portfolio meet their landlord service obligation, completing a rental property compliance check before re-letting and scheduling multi-property servicing when several units need attention before winter.
Split system call-outs leave our base for homes and shopfronts in Campbellfield itself, then north to Broadmeadows, Craigieburn, Epping, Wollert and Bundoora. Eastern jobs include Canterbury, Camberwell, Balwyn, Bulleen, Box Hill, Blackburn and Burwood, and apartments by the bay in Brighton are covered too.
Split System Offers for Melbourne Properties
- Arrival Within 20 Minutes – wherever your Melbourne property is, a parts-loaded van gets there in 20 minutes.
- Free Room Sizing Visit – kilowatt capacity worked out per room, with a written fixed price for your Melbourne home.
- VEU Rebate Lodged for You – when a Melbourne household swaps gas heating for a reverse cycle split system.
- Zip and HummLoan – pay off a new split system installation in Melbourne over time.
- Certificate of Compliance – from our own licensed refrigeration mechanics on every Melbourne split system job.
- Pre-Season Service Plans – split systems looked after ahead of the hot and cold months in Melbourne.
- Multi-Unit Discount – when two or more split systems go into one Melbourne property together.
Repair or Replace Your Split System?
Still Under Warranty – book a licensed technician so the manufacturer warranty cover stays valid.
Repeated Breakdowns – a unit repaired more than once this year is worth a repair-versus-replacement assessment.
Old Non-Inverter Unit – a modern inverter model costs less to run and holds the temperature more evenly.
DIY or Unlicensed Install – have it inspected and certified before you rely on it again.
VEU Rebate Deals
We also offer AirTouch Controllers
AirTouch 2 adds a wall-mounted touchscreen and free mobile app to your ducted system, so every zone gets its own airflow control. Browse our installed pricing from Daikin, Mitsubishi Electric, Panasonic and Rinnai.
12.5kw to 20kw
from $10,250
Includes the VEU rebate, GST and the replacement of the old ducts and grills.
12.5kw to 20kw
from $10,250
Includes the VEU rebate, GST and the replacement of the old ducts and grills.
12.5kw to 18kw
from $11,350
Includes the VEU rebate, GST and the replacement of the old ducts and grills.
13.0kw to 18kw
from $9,750
Includes the VEU rebate, GST and the replacement of the old ducts and grills.
The listed prices are subject to a site visit. If there are any variations or adjustments we will quote this accordingly.
Heating & Air Conditioning Repair Services in Melbourne
Reverse Cycle
Repair
Ducted Heating
Evaporative Cooling
Mitsubishi air conditioners
Daikin air conditioners
Get in Touch
Call Celik Group Air Conditioning for a split system repair, annual service, or replacement assessment.
A Split System Repair Service in Melbourne Built on Straight Answers
Our technicians won’t quote a repair until the cause is found, replace parts only when testing proves they have failed, and sign off a job only once the system has run in both heating and cooling mode. Celik Group Air Conditioning operates under an ARCtick refrigerant handling licence on reverse cycle split, multi-split and ducted systems in homes and in offices, factories, schools, nursing homes and other facilities, with genuine parts on every repair and a certificate of compliance at the end of every job.
What a Split System Visit From Us Includes
Our Own Licensed Staff
Every job is done by our in-house ARCtick licensed technicians, never subcontractors, and electrical work complies with AS/NZS 3000 wiring rules and electrical safety compliance, with electrical test and tag checks where needed. Certified professionals to your property, so you never need to worry about compliance, liability, or the quality of work carried out.
A Clear Answer on the Fault
You get the diagnosis in plain terms, any error code explained, and an upfront quote before a single part is replaced. We recommend the right system for each property based on size, layout, usage, and energy efficiency requirements.
Warranty Looked After
Genuine parts keep performance consistent, and new units get warranty registration, so a later fault goes through a warranty claim process rather than coming out of your wallet. Same-day quotes so you know exactly what the job will cost before any work begins on your property.
Proof the Unit Works
Repairs end with a test run, and new installations get system commissioning, a post-installation commissioning report and a certificate of electrical compliance. Job complete until the system performs correctly and the client is fully satisfied with the outcome.
Split System Replacement in Melbourne When an Old Unit Has Had Its Day
Split system replacement in Melbourne is worth it once an ageing unit keeps breaking down, still runs an outdated non-inverter compressor, or needs a compressor replacement that costs close to the price of new equipment. Every replacement from Celik Group Air Conditioning, an ARCtick certified and VBA registered business, begins by carrying out a pre-installation site assessment that sizes the new unit in kilowatts for a bedroom-sized single split system, a living room or an open-plan space, so it holds the temperature without short-cycling.
Alongside split systems, our installers fit reverse cycle air conditioning for Melbourne households, larger ducted systems run by zone management systems or an AirTouch 5 controller, slimline bulkhead air conditioning, commercial VRV systems, rooftop evaporative cooling and everything else in our air conditioning range. Homes wanting a dedicated heat source can have heating or gas ducted heating fitted by this business too.
Frequently Asked Questions
Here are some questions we are always asked. If you have a specific question, don’t be afraid to reach out to our team. We are here to help.
Why is my split system blowing warm air instead of cool?
Warm air when the remote is set to cool usually means low refrigerant from a leak, a dirty coil or filter choking airflow, or an outdoor unit that isn’t running. Split system repair in Melbourne begins with a pressure test to locate any leak, because refrigerant that is simply topped up will leak out again. The outdoor fan and compressor get tested as well, and it’s worth confirming the remote is actually on cooling rather than fan or dry mode.
What causes water to leak from a split system’s indoor unit?
The indoor unit draws water vapour out of the room as it cools, and that water drains away through a condensate drain hose. When the hose is blocked by dust, mould or an insect nest, the water backs up and drips down the wall or onto the floor. Clearing the blockage usually fixes it, but the technician also makes sure the indoor unit is mounted level and that the hose falls the right way outside.
Is it worth repairing an old split system, or should I replace it?
If a unit is under ten years old and the fault is a sensor, a fan motor or a drain problem, repair usually wins. Once a unit has broken down again and again, needs a new compressor, or is an old non-inverter model costing more to run than a modern equivalent, split system replacement in Melbourne is often cheaper over a few summers. Our team provides a repair-versus-replacement comparison after the diagnosis, so you can decide with real numbers.
How often should a split system be serviced?
Once a year is enough for most homes, ideally in spring so the unit is ready before summer. Units in dusty spots, rental properties with changing tenants, and small businesses running a unit all day benefit from a second visit before winter. Regular split system maintenance in Melbourne leads to fewer breakdowns in peak heat or cold, better air quality and lower running costs, and an annual service plan keeps the booking on the calendar for you.
What does a split system service include?
A standard service covers filter cleaning or filter replacement, coil cleaning on the indoor unit, a clear-out of the condensate drain, a refrigerant pressure check, and a look-over of the outdoor condenser, fan motor and mounting. The technician also tests the remote or Wi-Fi control and runs the unit in both modes. Split system maintenance in Melbourne for rental properties can include a written record for the landlord’s files.
Why does my split system keep turning on and off?
Short-cycling usually comes from a faulty thermistor reading the room temperature wrongly, a PCB fault, a blocked filter causing the coil to freeze and thaw, or a unit that is too large for the room. It wastes energy and wears the compressor, so it is worth fixing early. A technician tests the sensor and board first, then checks sizing if the parts are healthy.
Do landlords have to keep a rental property’s split system working?
Under Victoria’s rental minimum standards, a rental must have a fixed heater in good working order in the main living area, and a reverse cycle split system often fills that role. Landlord repair obligations then make the rental provider responsible for fixing it when it fails. A split system repair service in Melbourne that can inspect several properties in one run makes it easier to check units before each new tenancy.
My split system was installed without a licence. What should I do?
Any work on the refrigerant side of a split system needs an ARCtick refrigerant handling licence, and the electrical connection must meet AS/NZS 3000 wiring rules. A DIY or unlicensed installation risks gas leaks, electrical faults and a voided warranty. Book an inspection before relying on the unit again, and treat any later split system repair as the chance to have the installation checked and certified properly.
Why does my split system trip the circuit breaker?
A split system that trips the breaker as it starts usually has a compressor drawing too much current, a failing capacitor, water getting into the electrics, or a wiring fault on the dedicated circuit. Don’t keep resetting it, because the fault can get worse each time. A licensed technician isolates the unit, tests the circuit and components, and completes the split system repair only once the electrical fault is confirmed.
Can a split system outdoor unit go on an apartment balcony?
In most apartments, yes, as long as there is room for airflow around the unit and the owners corporation approves the placement. Many strata buildings set rules on where outdoor units can sit and how pipework is run, so approval comes before any work starts. A balcony unit is also more exposed to weather, which makes an annual check of its mounting and cabinet worthwhile.
Areas we serve
Serving Melbourne & Surrounding Areas
Brighton
Hampton
Broadmeadows
Hawthorn
Camberwell
Balwyn
Bundoora
Box Hill
Blackburn
Burwood
Mont Albert
Surrey Hills
Wollert
Fitzroy
Richmond
Epping
St Kilda
Prahran
Canterbury
Mt Waverley
Kensington
Parkville
Brunswick
Princes Hill
Flemington
Ascot Vale
Moonee Ponds
Ivanhoe
Heidelberg
Campbellfield
Bulleen
Templestowe
Craigieburn
